Maintaining your pool can be a big job, especially if you don’t use the best robotic pool cleaner for above ground pools. Unfortunately, there’s a lot of responsibility that comes with having a large body of water in your backyard, especially if you have plenty of plants, shrubbery, and trees. This can result in a lot of debris in your pool and will also attract a variety of insects. But this guide on how to keep above ground pool clean can walk you through the process while teaching you how to thoroughly clean your pool, making it safe for use while keeping it looking clean and scum-free.
If you’re a new pool owner, then learning how to keep above ground pool clean is important in order to keep your pool bacteria and debris-free. Your pool should be cleaned out once a week if it’s used more than three times a week and bi-weekly if it’s used two times a week or less.
To clean, you’ll need to do the following:
- Check the pump and ensure it’s working correctly and that the eyeball jets are working to circulate the water around the pool’s perimeter.
- Clean out the filter
- Scrub the walls and floor of the pool
- Vacuum out the pool
- Test the pool’s water
- Add chlorine
- Buy a robotic pool cleaner to cut down on pool maintenance
As you can see, cleaning out your pool can be time-consuming during the summer months, but with proper upkeep you can keep your pool free from bacteria, debris, and algae. Read on to learn how to keep your pool water clean and how to keep your pump and filter working efficiently.
Start with the Pump
The filter and pump are what form the heart of your pool. Both work to keep your pool clean and free of debris. The pump will provide the force needed to circulate the water in order to push debris into the filter. A good pump should be able to move all of the pool’s water through the filter within an eight hour period. We recommend running the pump for eight to twelve hours at a time during the day. If your pump is working correctly it will circulate the water around the pool’s perimeter. If the water in your pool is constantly moving this can make it more difficult for bacteria and algae to grow. If you notice that the water around the pool’s perimeter isn’t moving much, make sure you adjust the eyeball jets located in the inlets in order to improve circulation.
The pool’s filter is designed to remove and catch debris that’s microscopic, as well as larger debris. Some filters can be cleaned by backwashing when the pressure gauge reads eight pounds above normal. Filters with cartridges are easier to clean. Simply remove and wash the cartridge off, then replace it. Over time, a cartridge will need to be replaced in order to improve the filter’s cleaning efficiency. Many of these cartridges can last for a period of six to nine months.
Focus on Areas with Minimal Circulation
Every above ground pool will have an area that has no or little circulation. These are the areas you’ll want to pay close attention to when you’re cleaning out your pool since algae tends to grow in these areas. The floor and walls of the pools should be vacuumed and scrubbed once or twice a week. Even if you have an automatic pool cleaner, these areas may still need extra TLC. If you’d like to learn how to vacuum above ground pool, click here to read our in-depth article.
Test Your Water
When you test your pool water, you’ll be testing it for sanitizers and the pH level. The water should be tested a few times a week. With a little experience you’ll be able to understand how chemical application, weather, and bather load can affect the quality of your pool water. Regular testing ensures that the water remains clean all season long. You can use a digital test strip reader to make this process easier and faster.
If a pool’s pH level is at 7.2 or higher it can significantly reduce the pool chemical’s effectiveness. Make sure you test the pH level two to three times a week and use a pH increaser or reducer in order to bring the level to the proper range. If you’re having trouble maintaining the correct range, you will need to check the water’s total alkalinity and ensure that it’s in the ideal range. If it’s not then you will need to adjust the alkalinity level.
Do I Need to Add Chlorine in an Above Ground Pool?
Yes. The most efficient and commonly used sanitizer for all pools is chlorine. Chlorine tablets are compressed, which allows them to dissolve steadily and slowly, releasing chlorine into the water. The chlorine will help to wipe out the bacteria and keep it looking clean. You can also use chlorine granules or sticks. Regardless of which form you decide to use, you’ll want to use stabilized chlorine. This type is processed in order to protect it from the sun’s rays. This results in improved effectiveness and allows the chlorine to work for a longer period of time. You should also always keep chlorine in your floater and skimmer.
Can a Robotic Pool Cleaner Help to Cut Down on Pool Maintenance?
Yes. If you don’t want to spend an hour or two cleaning out your pool every week, then this type of pool cleaner can do a lot of the hard work for you. We recommend the Dolphin Nautilus Automatic Robotic Pool Cleaner. This pool cleaner is powerful, efficient, and available at a reasonable price. To learn more, click here to read our robotic pool cleaner buyer’s guide.
Now that you know how to keep above ground pool clean you can create your own cleaning routine based on how frequently the pool is used. If you and your family use the pool more than three times a week then the pool should be cleaned out once a week. If the pool is only used once or twice a week, then you may be able to get away with just bi-weekly cleanings. However, we still recommend testing the pool water three times a week, regardless of how often the pool is cleaned out or used.